EVLN: Tesla-3's clever mystery-box drivetrain> (Munro ate crow)

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

EVLN: Tesla-3's clever mystery-box drivetrain> (Munro ate crow)

Electric Vehicle Discussion List mailing list


https://www.teslarati.com/teslas-model-3-electric-motor-is-a-clever-mystery-box-says-auto-experts/
Tesla’s Model 3 electric motor is a clever mystery box, says auto experts
May 8, 2019  Dacia J. Ferris

[images  
https://www.teslarati.com/wp-content/uploads/2018/07/model-3-drivetrain-1.jpg
Model 3 drivetrain

https://www.teslarati.com/wp-content/uploads/2018/04/Sandy-Munro-Tesla-Model-3.jpg
Sandy Munro holds up the Automatic Drive Module of the Tesla Model 3
Credit: Autoline Network/YouTube
]

Sandy Munro, a teardown specialist and auto industry veteran, is releasing
the results of a study he conducted with battery expert Mark Ellis comparing
the motors inside four electric vehicles, one of which was a Tesla Model 3.
Despite analyzing the vehicle for a long time, the auto expert states that
there are still mysteries that he is yet to uncover on the electric sedan.

“The Tesla has a lot of stuff hidden. The Tesla is a big mystery. It’s not
obvious sometimes what clever things they’ve done, ” he commented about the
California-based car maker’s motor in a recent interview summarized by
Industry Week. “There’s mysteries every day. We thought we were clever, but
we’re not that clever.”

One of the clever features Munro and Ellis discovered in their Model 3
teardown was the disconnect device for the high voltage. “It’s not really a
fuse…It’s like a little explosion. If the car rolls over, they have a little
disconnect that blows up, (cutting) all the power to everything and that way
you don’t have an electric nightmare,” he revealed. Also, the inner magnets
of the Model 3 motor were found to be under a lot of stress, which is not
something other manufacturers have learned to do in high volume production.
“We’ve talked to lots of magnet manufacturers, but this might be another one
of these made-in-Tesla kind of deals. They make a lot of stuff in-house,”
Munro guessed.

Another innovation that impressed the teardown team was how advanced the
inverter/convertor device was that provides power to the motor, particularly
in the use of silicon carbide on the devices’ integrated circuits. “It
creates a lot less heat and is a lot faster than the Chevy and BMW,” Ellis
added to the discussion. “Silicon carbide is the latest and greatest and
Tesla so far is the only vehicle out there with it.” Munro and Ellis further
noted the high level of tech Tesla’s motor contained, all while being
considerably smaller than the competition.

The study will be released in a few weeks and also includes detailed
information about the motors inside the Chevy Bolt, BMW i3, and Jaguar
I-Pace. Munro had very positive things to say about Tesla’s technology, but
the electric vehicles produced by industry giants did not receive quite the
same accolades. “It looks like the other guys just went around and glued
together whatever they could find off the shelf,” Munro jabbed at Tesla’s
competition.

The BMW i3 was hit particularly hard and cited as the heaviest, most
expensive, and very inefficient overall. “It’s not designed for… I don’t
know what it’s designed for, really,” Munro swiped in the interview. “While
everything on Tesla is…very, very efficient engineering.” Munro still isn’t
sold on the Model 3 body, though, and takes issue with the complexity of the
process it takes to manufacture it thanks to the number of parts, materials,
and fastenings involved.

Munro has a history of strong opinions on Tesla’s car intended for the mass
market. After completing an initial teardown of a 2017 version of the
vehicle, he infamously commented that the car’s panel gaps could be seen
“from Mars” among other very critical remarks about the way the car was
manufactured. Tesla eventually issued a statement in response to the
criticisms, indicating that significant improvements had been made to its
Model 3 manufacturing process which would render moot many of the issues
identified.

Once the Model 3 teardown was complete, Munro later admitted to eating “a
lot of crow” in response to the technology installed and implemented
throughout the car. He praised the Model 3 battery pack and the way it
handles on the road, in particular, and also estimated Tesla was turning a
30% profit on the vehicle. Munro ultimately concluded that everything from
the car’s suspension and down was perfect, but everything about its bodywork
was questionable.

While the study Sandy Munro and Mark Ellis have conducted has not yet been
released, from the sounds of it, crow seems to have still been on the menu
for Tesla’s inner workings while old criticisms still stand about its outer
packaging.
[© teslarati.com]


+
http://www.reporterherald.com/business-top-stories/ci_32605388/lovelands-lightning-systems-releases-powertrain-ford-f-59s
Loveland's Lightning Systems releases powertrain for Ford F-59s
04/30/2019  Lightning Systems ... has five electric powertrains available
that work with Ford and GM delivery vans, shuttle ...
http://extras.mnginteractive.com/live/media/site47/2019/0430/20190430__05RHBLIGHTNINGw~1.jpg




For EVLN EV-newswire posts use:
 http://evdl.org/archive/


{brucedp.neocities.org}

--
Sent from: http://electric-vehicle-discussion-list.413529.n4.nabble.com/
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)